BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Century Training - ECPv6.17.3//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-ORIGINAL-URL:https://centurytraining.com.au
X-WR-CALDESC:Events for Century Training
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:Australia/Brisbane
BEGIN:STANDARD
TZOFFSETFROM:+1000
TZOFFSETTO:+1000
TZNAME:AEST
DTSTART:20250101T000000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20260831T070000
DTEND;TZID=Australia/Brisbane:20260902T143000
DTSTAMP:20260731T004442Z
CREATED:20260617T064402Z
LAST-MODIFIED:20260731T004442Z
UID:3251-1788159600-1788359400@centurytraining.com.au
SUMMARY:TLILIC0003 Licence to operate a forklift truck
DESCRIPTION:TLILIC0003 Licence to operate a forklift truck \nLF\n\n\nThis nationally recognised course provides participants with the skills and knowledge required to operate a forklift truck safely in accordance with workplace procedures\, regulatory standards\, and relevant legislation. \n\nA forklift truck is defined as a powered industrial truck equipped with a lifting mechanism—typically a mast and elevating load carriage with fork arms or other attachments—that is capable of raising loads 900mm above the ground. This course does not cover the use of pedestrian-operated or pallet trucks. Students must be 18 years or over. \n\nEntry Requirements\n\n\n	Participants must be 18 years of age or older\n	Basic English literacy and numeracy are required\n	Participants must provide valid identification\n	PPE (e.g. steel cap boots\, high-vis clothing) must be worn\n\n\nDelivery Format\n\n\n	Face-to-face training across 3 days\n	Includes theory and practical training\, RTO and licensing assessments\n	Delivered using Work Ready training methods designed to prepare candidates for real job sites\n\n\nCourse Content\n\nParticipants will learn to: \n\n\n	Conduct routine checks and pre-operational inspections\n	Safely plan and prepare forklift operations\n	Operate the forklift in a variety of scenarios\n	Shift loads safely and efficiently\n	Shut down and secure the forklift post-operation\n	Understand WHS obligations and hazard control measures\n\n\nAssessment\n\nAssessment includes: \n\n\n	Written theory assessments\n	Calculations assessment\n	Practical driving and operational assessments conducted in accordance with RTO and WHSQ requirements\n\n\nOutcome\n\nOn successful completion\, participants will receive: \n\n\n	A nationally recognised Statement of Attainment\n	Candidate Assessment Summary (CAN) required to apply for a High Risk Work Licence (HRWL) – LF class\n\n\nFees and Payment\n\nPayment is $600 at the time of booking to secure a place. If pre-assessment requirements are not met\, further training may be required and re-attendance fees may apply. \n\n\nTarget Audience:\n        \n       \n\n\nLearning Outcomes:\n        \n       \n\nLearning Methods:\n        \n       \n\nProgram Benefits:\n        \n       \n\nContent:\n        \n       \n      Enquire \nUpcoming Workshops\n      NameDateTimeLocationAvailable SpacesCost
URL:https://centurytraining.com.au/timetable/tlilic0003-licence-to-operate-a-forklift-truck/
LOCATION:PORTSMITH\, PORTSMITH\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20260903T070000
DTEND;TZID=Australia/Brisbane:20260903T130000
DTSTAMP:20260806T064358Z
CREATED:20260806T064358Z
LAST-MODIFIED:20260806T064358Z
UID:3305-1788418800-1788440400@centurytraining.com.au
SUMMARY:RIIWHS202E Enter and work in confined spaces
DESCRIPTION:RIIWHS202E Enter and work in confined spaces \nCSE\n\n\nThis nationally recognised unit provides the skills and knowledge required to safely enter and work in confined spaces across a range of industries\, including construction\, utilities\, mining\, and civil infrastructure. A confined space is defined as a partially or fully enclosed area that is not designed for continuous occupancy and presents a risk from hazardous substances or conditions. \n\nThe course is essential for workers who may be required to enter or work near confined spaces and must meet WHS and industry compliance standards. \n\nPractical training is performed within a purposely built confined space simulator\, including tagging and lockout processes and the use of atmospheric testing devices. This unit largely focuses on a practical training approach to ensure participants are well equipped and prepared for working within a confined space. \n\nWhat You’ll Learn\n\nParticipants will gain knowledge and practical skills in: \n\n\n	Identifying confined spaces and associated hazards\n	Risk assessment and hazard control measures\n	Safe entry and exit procedures\n	Use of gas detection equipment\n	Permit-to-work systems\n	PPE selection and use\n	Applying emergency and rescue procedures\n\n\nWho Should Attend\n\nThis course is suitable for: \n\n\n	Workers entering or working around confined spaces\n	Supervisors and safety observers\n	Maintenance and shutdown crews\n	Anyone required to hold a confined space qualification under WHS legislation\n\n\nTraining Commitment\n\n\n	Delivery Mode: Face-to-face\n	Duration: Typically 1 day (approximately 8 hours)\n	Format: Classroom-based theory followed by practical training in a simulated confined space environment\n\n\n\nTarget Audience:\n        \n       \n\n\nLearning Outcomes:\n        \n       \n\nLearning Methods:\n        \n       \n\nProgram Benefits:\n        \n       \n\nContent:\n        \n       \n      Enquire \nUpcoming Workshops\n      NameDateTimeLocationAvailable SpacesCost
URL:https://centurytraining.com.au/timetable/riiwhs202e-enter-and-work-in-confined-spaces/
LOCATION:PORTSMITH\, PORTSMITH\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20260907T070000
DTEND;TZID=Australia/Brisbane:20260909T143000
DTSTAMP:20260617T064401Z
CREATED:20260617T064401Z
LAST-MODIFIED:20260617T064401Z
UID:3239-1788764400-1788964200@centurytraining.com.au
SUMMARY:TLILIC0040 Licence to operate a non-slewing mobile crane (greater than 3 tonnes capacity)
DESCRIPTION:TLILIC0040 Licence to operate a non-slewing mobile crane (greater than 3 tonnes capacity) (Logbook) \nCNLB\n\n \nThis course covers the skills and knowledge required to safely operate a slewing mobile crane with a Maximum Rated Capacity (MRC) greater than 3 tonnes. Delivery structure is 3 days of classroom-based training. \n\nWorkplace Logbook Phase\n\nAfter initial training\, learners must return to their workplace to complete crane operations logbook hours that are recorded under supervision of a licensed and experienced operator. \n\nLearners paying online are required to pay $1\,500 to secure a seat on the course\, the remaining $700 is due on the first day the course commences. \n\n\nTarget Audience:\n        \n       \n\n\nLearning Outcomes:\n        \n       \n\nLearning Methods:\n        \n       \n\nProgram Benefits:\n        \n       \n\nContent:\n        \n       \n      Enquire \nUpcoming Workshops\n      NameDateTimeLocationAvailable SpacesCost
URL:https://centurytraining.com.au/timetable/tlilic0040-licence-to-operate-a-non-slewing-mobile-crane-greater-than-3-tonnes-capacity/
LOCATION:PORTSMITH\, PORTSMITH\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20260910T070000
DTEND;TZID=Australia/Brisbane:20260910T143000
DTSTAMP:20260824T224350Z
CREATED:20260812T024404Z
LAST-MODIFIED:20260824T224350Z
UID:3324-1789023600-1789050600@centurytraining.com.au
SUMMARY:RIIWHS204E Work safely at heights
DESCRIPTION:RIIWHS204E Work safely at heights \nWAH\n\n\nThis nationally recognised unit provides participants with the knowledge and practical skills required to work safely at heights across a range of industries\, including construction\, mining\, maintenance\, telecommunications\, and more. The course focuses on understanding the risks associated with working at height and how to apply appropriate control measures in line with legislative and organisational requirements.This course is essential for anyone who is required to perform tasks at height where there is a risk of falling. \n\nWhat You’ll Learn\n\nParticipants will develop the ability to: \n\n\n	Identify work requirements and procedures for working safely at heights\n	Understand the hierarchy of control for fall prevention\n	Conduct risk assessments and apply appropriate control measures\n	Inspect\, fit\, and use fall protection equipment correctly\n	Perform tasks safely at heights using correct procedures\n	Carry out housekeeping and finalisation tasks following work at heights\n\n\nWho Should Attend\n\nThis course is suitable for: \n\n\n	Workers required to work at height (e.g.\, scaffolding\, ladders\, EWP use\, rooftops)\n	Site supervisors and team leaders\n	Maintenance personnel\n	Anyone needing to meet WHS compliance for working at heights\n\n\nTraining Commitment\n\n\n	Delivery Mode: Face-to-face\n	Duration: 1 full day (approximately 8 hours)\n	Format: Classroom-based theory session followed by hands-on practical training in a simulated work-at-height environment\n\n\n\nTarget Audience:\n        \n       \n\n\nLearning Outcomes:\n        \n       \n\nLearning Methods:\n        \n       \n\nProgram Benefits:\n        \n       \n\nContent:\n        \n       \n      Enquire \nUpcoming Workshops\n      NameDateTimeLocationAvailable SpacesCost
URL:https://centurytraining.com.au/timetable/riiwhs204e-work-safely-at-heights/
LOCATION:PORTSMITH\, PORTSMITH\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20260914T070000
DTEND;TZID=Australia/Brisbane:20260918T143000
DTSTAMP:20260803T014353Z
CREATED:20260803T014353Z
LAST-MODIFIED:20260803T014353Z
UID:3303-1789369200-1789741800@centurytraining.com.au
SUMMARY:CPCCLRG3001 Licence to perform rigging basic level
DESCRIPTION:CPCCLRG3001 Licence to perform rigging basic level \nRB\n\n \nThis nationally recognised course provided participants with the skills and knowledge required to perform rigging work safely and competently in accordance with WHS regulations and industry standards. This 5 day course includes theory and practical training associated with movement of plant and equipment\, steel erections\, hoists\, placement of pre-cast concrete\, safely nets and static lines\, perimeter safety screens and shutters; and cantilever crane loading platforms for licensing purposes. Students must be over 18 years of age. \n\nEntry Requirements\n\n\n	Participants must be 18 years of age or older\n	Participants must have a Dogging High Risk Licence\, EWP Licence\n	Basic English literacy and numeracy required\n	Participants must provide valid identification\n	PPE (e.g. steel cap boots\, high-vis clothing) must be worn\n\n\nDelivery Format\n\n\n	Face-to-face training across 5 days\n	Learners may need to allocate additional time for evening revision to maximise learning outcomes\n	Includes theory and practical training\, RTO and licensing assessments\n	Delivered using Work Ready training methods designed to prepare candidates for real job sites\n\n\nCourse Content\n\nParticipants will learn to: \n\n\n	Identify methods of moving and placing tools\, equipment and materials\n	Select and inspect equipment\n	Establish and maintain communication\n	Erect and dismantle structures and plant\n	Pack up and remove risk controls and equipment\n\n\nAssessment\n\nAssessment includes: \n\n\n	Written theory assessments\n	Calculations assessment\n	Practical assessments conducted in accordance with RTO and WHSQ requirements\n\n\nOutcome\n\nOn successful completion\, participants will receive: \n\n\n	A nationally recognised Statement of Attainment\n	Candidate Assessment Summary (CAN) required to apply for a High Risk Work Licence (HRWL) – RB class\n\n\nFees and Payment\n\nA deposit of $1500 is required at the time of booking to secure a place. The remaining $500 is payable on the first day of the course. If pre-assessment requirements are not met\, further training may be required and re-attendance fees may apply.\n\nPlease view this link for CSQ funding options. \n\n\nTarget Audience:\n        \n       \n\n\nLearning Outcomes:\n        \n       \n\nLearning Methods:\n        \n       \n\nProgram Benefits:\n        \n       \n\nContent:\n        \n       \n      Enquire \nUpcoming Workshops\n      NameDateTimeLocationAvailable SpacesCost
URL:https://centurytraining.com.au/timetable/cpcclrg3001-licence-to-perform-rigging-basic-level/
LOCATION:PORTSMITH\, PORTSMITH\, Australia
CATEGORIES:Workshop
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Australia/Brisbane:20260921T070000
DTEND;TZID=Australia/Brisbane:20260923T143000
DTSTAMP:20260716T034436Z
CREATED:20260716T034436Z
LAST-MODIFIED:20260716T034436Z
UID:3274-1789974000-1790173800@centurytraining.com.au
SUMMARY:TLILIC0003 Licence to operate a forklift truck
DESCRIPTION:TLILIC0003 Licence to operate a forklift truck \nLF\n\n\nThis nationally recognised course provides participants with the skills and knowledge required to operate a forklift truck safely in accordance with workplace procedures\, regulatory standards\, and relevant legislation. \n\nA forklift truck is defined as a powered industrial truck equipped with a lifting mechanism—typically a mast and elevating load carriage with fork arms or other attachments—that is capable of raising loads 900mm above the ground. This course does not cover the use of pedestrian-operated or pallet trucks. Students must be 18 years or over. \n\nEntry Requirements\n\n\n	Participants must be 18 years of age or older\n	Basic English literacy and numeracy are required\n	Participants must provide valid identification\n	PPE (e.g. steel cap boots\, high-vis clothing) must be worn\n\n\nDelivery Format\n\n\n	Face-to-face training across 3 days\n	Includes theory and practical training\, RTO and licensing assessments\n	Delivered using Work Ready training methods designed to prepare candidates for real job sites\n\n\nCourse Content\n\nParticipants will learn to: \n\n\n	Conduct routine checks and pre-operational inspections\n	Safely plan and prepare forklift operations\n	Operate the forklift in a variety of scenarios\n	Shift loads safely and efficiently\n	Shut down and secure the forklift post-operation\n	Understand WHS obligations and hazard control measures\n\n\nAssessment\n\nAssessment includes: \n\n\n	Written theory assessments\n	Calculations assessment\n	Practical driving and operational assessments conducted in accordance with RTO and WHSQ requirements\n\n\nOutcome\n\nOn successful completion\, participants will receive: \n\n\n	A nationally recognised Statement of Attainment\n	Candidate Assessment Summary (CAN) required to apply for a High Risk Work Licence (HRWL) – LF class\n\n\nFees and Payment\n\nPayment is $600 at the time of booking to secure a place. If pre-assessment requirements are not met\, further training may be required and re-attendance fees may apply. \n\n\nTarget Audience:\n        \n       \n\n\nLearning Outcomes:\n        \n       \n\nLearning Methods:\n        \n       \n\nProgram Benefits:\n        \n       \n\nContent:\n        \n       \n      Enquire \nUpcoming Workshops\n      NameDateTimeLocationAvailable SpacesCost
URL:https://centurytraining.com.au/timetable/tlilic0003-licence-to-operate-a-forklift-truck-2/
LOCATION:PORTSMITH\, PORTSMITH\, Australia
CATEGORIES:Workshop
END:VEVENT
END:VCALENDAR